MultiColor Puff Heat Transfer Vinyl Sheet – Hernandez Homemade
You will receive (1) 9x9 or 12x12 Puff HTV Sheet and (1) Reusable Transfer Sheet for ever 3 Transfers purchased
******Puff effect from the PRINTABLE Puff is less than the regular Puff vinyl, colors also go more Vintage and not bright after it’s pressed ,
Puff vinyl is a very unique Its reaction is similar as if you stretched a ballon and the color will lighten*****.
( 1) Transfer Sheet Per 3 12x12 Images for Puff Patterns
- Cut on Pattern Side and DO NOT MIRROR.
- After weeding excess vinyl, apply INCLUDED ( 1 sheet for every 3 sheets) Mask to transfer design off of the backing and place on your garment face up.
- Use a squeegee to avoid air bubbles forming when applying the Transfer Tape to the vinyl. Bubbles within transfer tape will result in bubbles forming in the vinyl when it's applied to the substrate.
Manufactures Application Instructions
Application Instructions
270°F~275°F (132°C~135°C)
5~8 Seconds
Peel mask warm
Medium-Heavy, even pressure
- PrePress fabric to remove moisture
- Place the design onto the fabric of choice
- Cover the design with a Teflon sheet prior to heat press
- Press at medium pressure
- Remove the protective carrier at Hot Peel
1. Optimal temperature range may vary depending on your heat press. Testing prior to application is strongly recommended.
2. Puff effect from the PRINTABLE Puff is less than the regular Puff vinyl.
100% cotton, 100% uncoated polyester, poly/cotton blends
- Wash warm water
- Inside out wash
- Tumble dry normal
You will receive (1) 9x9 or 12x12 Puff HTV Sheet and (1) Reusable Transfer Sheet for ever 3 Transfers purchased ******Puff effect from the PRINTABLE Puff is less than the regular Puff vinyl, colors also go more Vintage and not bright after it’s pressed , Puff vinyl is a very unique Its reaction is similar as if you stretched a ballon and the color will lighten*****. ( 1) Transfer Sheet Per 3 12x12 Images for Puff Patterns Cut on Pattern Side and DO NOT MIRROR. After weeding excess vinyl, apply INCLUDED ( 1 sheet for every 3 sheets) Mask to transfer design off of the backing and place on your garment face up. Use a squeegee to avoid air bubbles forming when applying the Transfer Tape to the vinyl. Bubbles within transfer tape will result in bubbles forming in the vinyl when it's applied to the substrate. Manufactures Application Instructions Application Instructions 270°F~275°F (132°C~135°C)5~8 SecondsPeel mask warmMedium-Heavy, even pressure - PrePress fabric to remove moisture - Place the design onto the fabric of choice - Cover the design with a Teflon sheet prior to heat press- Press at medium pressure- Remove the protective carrier at Hot Peel 1. Optimal temperature range may vary depending on your heat press. Testing prior to application is strongly recommended.2. Puff effect from the PRINTABLE Puff is less than the regular Puff vinyl.100% cotton, 100% uncoated polyester, poly/cotton blends - Wash warm water- Inside out wash- Tumble dry normal
